Heavy Duty Batch Debearder

with Gear Drive & Digital Motor Controller

Remove appendages and hulls, break up multiple florets or condition seeds for optimum germination.

Only Mater Seed Equipment offers a user configurable laboratory debearder! Choose interchangeable impellers and drums for your types of seeds.

Batch style for convenient small lot processing.

Features and Specifications:

Three styles of Interchangeable Impellers:

Adjustable Brush holder with interchangeable Brush Strips
Multi-Tined Impeller with fixed Tines
Adjustable Paddle with Urethane Wipers

Four styles of Interchangeable Drums:

Perforated with 2mm, 3mm, or 4mm Holes
Unperforated
Unperforated with Removable Stationary Tines
Unperforated with Wire Ribs

Configurations

DB2001 Mater Heavy Duty Batch Debearder with Gear Drive & Digital Motor Controller

Maximum Processing Volume of 38 cubic inches (620 cc)
Includes DB0100 Solid End Plate

Requires Impeller and Drum – Some typical combinations and their uses shown below

Power required:115-125 Volts, 60 Hz, 200 Watts
220-240 Volts, 50-60 Hz units quoted upon request
Size and Weight: Uncrated 12 W, 36 L, 16 H inches (30, 92, 41 cm) & 64 lbs (29 kg) typical
Crated 19 W, 41 L, 18 H inches (48, 104, 46 cm) & 130 lbs (59 kg) typical

Impellers and Drums:

Flower and Vegetable Seeds – Polish; Remove Beards, Awns and Bristles. Rotating Brush Holder Assembly with a pair of Fine Brush Strips and Unperforated Plated Steel Drum.






Flower and Vegetable Seeds-Shear Off Appendages; Remove Husks. Rotating Brush Holder Assembly with a pair of Fine Brush Strips and Plated Steel Drum with 2mm diameter Perforations.






Remove Seeds from Stringy or Fibrous Matrix. Multi-Tined Stainless Steel Impeller and Unperforated Plated Steel Drum with Removable Stationary Tines.






Tree Seeds – Shear Off Appendages. Paddle Assembly with Adjustable Urethane Wipers and Plated Steel Drum Assembly with 3mm diameter Perforations.






Rice Processing – Remove Hulls. Rotating Brush Holder Assembly with a pair of Fine Brush Strips and Unperforated Plated Steel Drum with eight Wire Ribs welded inside.

New Setting Fixture

for Brushes and Paddles (Optional)

New Fixture for quickly, easily, and precisely setting the clearance between the drum and the brush or paddle assembly for your Mater Batch or Continuous Debearder. Comes with spacers for 1.0, 1.5, 2.0, 2.5, and 3.0mm clearances.